Nasty Baggers

FAIRING AND LID AUDIO SPECIAL

$899.00
( 0 Reviews )

Current stock: 0

Not only be seen but also be heard, this audio special allows you to hear your music at high speeds as well as providing you clear and distinctive sounding audio. With this package your Fairing gets yhe boost it needs with a set of 6.5 POLK AUDIO MARINE SPEAKERS AND your Bagger Lids become a great place to put your gear and A little bump in your trunk. These Speaker Lids are designed to hold and harness the POLK AUDIO MARINE 6 X 9 SPEAKERS and takes up minimal space and intrusion into your lower bag compartment. The ROCKFORD FOSGATE 300WATT FOUR CHANNEL AMP IS compact and small enough to place right on top of your existing radio inside your fairing, this means you don't have to put them inside your bags if you don't want to.

  • Audio Speaker Lids made from ABS plastic and design to hold a 6 x 9 speaker, comes with ABS Plastic grill cover.

  • 6-1/2" 2-way car speakers for shallow mounts
  • Dynamic Balance polymer/mica composite woofer with butyl rubber surround
  • 3/4" liquid-cooled silk/polymer composite dome tweeter
  • Neodymium tweeter magnet
  • Kapton voice coil
  • built-in 2-way crossover network
  • ABS wheel-design grilles
  • stainless steel mounting hardware
  • power range: 6-55 watts RMS (165 watts peak power)
  • frequency response: 50-22,000 Hz
  • sensitivity: 92 dB
  • top-mount depth: 2"

     

  • 6"x9" 3-way car speakers (pair)
  • Dynamic Balance polymer/mica composite woofer with butyl rubber surround
  • 1" liquid-cooled silk/polymer composite dome tweeter
  • 3/4" liquid-cooled silk/polymer composite dome supertweeter
  • Neodymium tweeter magnet
  • Kapton voice coil
  • built-in 2-way crossover network
  • ABS wheel-design grilles
  • stainless steel mounting hardware
  • power range: 10-100 watts RMS (300 watts peak power)
  • frequency response: 35-22,000 Hz
  • sensitivity: 93 dB
  • top-mount depth: 3-3/16"

  • 4-channel car amplifier
  • 75 watts RMS x 4 at 4 ohms
  • non-bridgeable, 4-ohm stable per channel
  • CEA-2006 compliant
  • Boosted Rail amp technology
  • Dynamic Thermal Management cooling system
  • selectable high- and low-pass filters (80 Hz, 12 dB/octave)
  • differential-balanced inputs eliminate noise from your vehicle's electrical system
  • preamp and speaker-level inputs
  • 10-gauge power and ground leads and a 30-amp fuse recommended — wiring and hardware not included with amplifier
  • no onboard fuses — when installing multiple amps in a system, an additional 30-amp in-line fuse between the distribution block and the amplifier is recommended
  • dimensions: 6-15/16"W x 1-9/16"H x 4-5/16"D

0 Reviews

Be the first to review this product.

Add a Review